The Environexus NEXUS-DIM series offers two retro-fit dimming modules specifically used to enable IP Control for your existing light switches. The NEXUS-DIM-LE will also report immediate wattage consumption or kWh energy usage over a period of time.
Both NEXUS-DIM-LE and NEXUS-DIM-TE are wireless modules, powered from the mains supply. The NEXUS-DIM-LE requires a neutral connection. In the event of a power failure, non-volatile memory retains all programmed information relating to the NEXUS operating status.
Both NEXUS-DIM devices act as repeaters in the NEXUS-NETWORK. Acting as a bridge for communication, each device can forward NEXUS command messages to their destinations if the NEXUS-BRIDGE is out of range from the destination device.
By taking advantage of the NEXUS mesh network, commands can be routed to their listening destination via other certified NEXUS products.
Please use the below chart when choosing the correct device for dimming.
Click here to view the LED Compatibility Chart