INITIAL SET UP OF NEXUS-QUAD
STEP 1: OPEN UNIT
Unlock the NEXUS-QUAD from its battery cover by twisting the battery cover from the main unit in a counter clockwise motion and pulling the battery cover outward to separate the main unit form the battery cover.
STEP 2: POWER THE UNIT
Insert 4 AAA batteries orientated according to the picture located in the battery holder (with the negative end depressing the battery spring)
Plug in the USB cable to the device and connect to a power source.
STEP 3: CLOSE THE UNIT
Lock the NEXUS-QUAD main unit cover by aligning the Lock/Unlock Half Dimple Markers under the "unlock" symbol and twisting the battery cover from the main unit in a clockwise motion until the Lock/Unlock Half-Dimple Markers form a circle under the "lock" symbol (a tangible click will be felt)
NEXUS-QUAD Effective Range
he NEXUS-QUAD can operate outdoors in rain and snow. Placed outdoors where directly exposed to rain or snow, the NEXUS-QUAD should be orientated such that the Temperature/Humidity Sensor is facing downward and is positioned on the bottom of the unit.
NEXUS-QUAD Physical Installation
The NEXUS-QUAD can be physically mounted in 2 ways, on the wall or ceiling. It can be mounted flat against the wall via the Back-Mount Plate or angled in a direction via the Back-Mount Arm.
Mounting the NEXUS-QUAD flat against the wall via the Back-Mount Plate
Mounting the NEXUS-QUAD angled in a direction via the Back-Mount Arm
NOTE: The Back-Mount Arm may be locked in various angles by turning the Friction Lock clockwise and counter-clockwise to tighten or loosen (respectively) the angle of the arm.