STEP 1: CONNECT YOUR BRIDGE
Start by connecting your NEXUS-BRIDGE to your existing wifi modem/router, and power the unit with the supplied cables. It is recommended that the network cable be connected before powering the bridge
NOTE: The NEXUS-BRIDGE comes with 4 x AA Batteries, these should not be used to power the NEXUS-BRIDGE. They can ONLY be used to add/remove devices.
STEP 2: POWER YOUR BRIDGE
You will need to wait approximately 2 to 5 minutes for the NEXUS-BRIDGE to establish a network connection. You will know when this is completed as all three indicator lights will be solid.
NOTE: If the unit is unable to connect to the internet, the Internet light will flash rapidly.
Blue Light = Power
Orange Light = Mesh Network
Green Light = Internet Connection
STEP 3: LOCATE YOUR BRIDGE
The NEXUS-BRIDGE will assign itself an IP address via DHCP. To discover this address, you will need to use Fing (available from App Store and Google Play) or similar network sniffer. Look for the MAC address found on the underside of the NEXUS-BRIDGE.
STEP 4: REGISTER YOUR BRIDGE
Using any standard internet browser connected to the same network, type in the IP Address of the bridge and follow the prompts to register your details.
STEP 5: LOGIN TO YOUR BRIDGE
Once registration is complete, you may login to the box by visiting login.environexus.com.au and use your username and password to get access.