STEP 1: LOG INTO THE NEXSUS-BRIDGE
1. Log into the NEXUS-BRIDGE (Instructions - CLICK HERE)
STEP 2: ADD NEW DEVICE
To start adding your devices click on the DEVICES TAB, then ADD DEVICES
You will be promoted to select your device type.
Select Add ZWave devices, Click ADD
STEP 3: CHOOSE OPTION 1
When prompted select OPTION 1
When the below window appears on the screen you are ready to start adding devices:
STEP 4: ADD AND NAME YOUR DEVICE
If you scroll to the top of the page you will see that the status window says "Add new devices now..."
This message indicates the the NEXUS-BRIDGE is in inclusion mode.
The orange light on the NEXUS-BRIDGE will also be flashing
At this point you need to activate the NEXUS-REED to add to the NEXUS-NETWORK.
Activate the NEXUS-REED by clicking the SYNC BUTTON