There are four lights on the NEXUS-BRIDGE which indicate the status of the NEXUS-BRIDGE.
NOTE: Always plug in the Ethernet cable before the power cable, as the Bridge will search for an available internet connection almost immediately after power up.
On initial power up of the NEXUS-BRIDGE, the lights will blink. You should wait up to 2 minutes for the Power, Ready and Network Lights to illuminate and remain solid. The lights will blink until connection is established.
If the green light begins to flash, the NEXUS-BRIDGE is having difficulties connecting to the internet, you will need to check for firewalls or other potential network blocks. CLICK HERE TO TROUBLESHOOT
The Ready light will flash if the NEXUS-BRIDGE is in sync mode and trying to add or remove a device.
NOTE: The NEXUS-BRIDGE comes with 4 x AA Batteries, these should ONLY be used in the inclusion process and not as a backup power supply.