NERO flush devices are rated for a maximum ambient temperature of 40ºC. In many roof cavities it is not uncommon for this temperature to be exceeded. If you are installing devices in a roof ensure that you have taken this into account for long term reliability of the device and safety of the installation.
The NERO devices can be installed in the ceiling rather than behind the wall switch if there is no space for the device.
Device installed at each circuit
- Install a NERO device at each circuit as seen in the diagram below
- Ensure that there is an active and a neutral at each location to power the devices
- From each device, run the output to its adjacent lighting circuit
- From each device, run a cable to the wall switch for manual control
