The NERO devices can be used with momentary push button mechs as well as toggle switches.
If you can control the device from software but not the manual switch please ensure that your device is set to the correct configuration setting.
- To edit a configuration setting, select the arrow icon of the device.
- Scroll down and select the DEVICE OPTIONS tab, then click ADD CONFIGURATION SETTINGS
NOTE: If you delete a configuration setting by clicking on the “X” button, that parameter is not changed to its default setting. It is simply removed from the display on the software.
Enter the appropriate values as outlined below:
NOTE: the default value for devices will differ
NERO-RELAY/2RELAY - Switch Type I1
|
Variable |
Data Type |
Value |
Function |
Default Value |
|
1 |
1 Byte DEC |
0 |
Momentary switch |
1 |
|
1 |
Toggle switch |
NERO-DIM - Switch Type I2
|
Variable |
Data Type |
Value |
Function |
Default Value |
|
1 |
1 Byte DEC |
0 |
Momentary switch |
0 |
|
1 |
Toggle switch |
4. Click SAVE CHANGES.