The NERO-MULTI is a multi-purpose battery or USB powered sensor that can monitor temperature, lighting, motion, humidity, UV and vibration. With a 5 meter range and a 120-degree field of view, the NERO-MULTI is a versatile device that can be wall mounted or discretely recessed (optional recessor available).
Familiarize yourself with your NERO-MULTI
Your NERO-MULTI comes packaged with a number of accessories that will help with its installation and operation.
Micro USB Cable
Setup your power
Your NERO-MULTI can be powered by battery or by USB with an appropriate adaptor. For the purposes of installation and setup, even if you intend to power your sensor with batteries, we recommend utilizing the provided USB cable for setup. For this, you’ll need an adaptor to plug your USB cable into; this can include any USB port on a computer and most mobile phone chargers. These steps can be performed in any location with your home, and not necessarily in your NERO-MULTI’s final installation location.
For a USB powered installation:
- Remove the Battery cover via sliding the Unlock button and separating the two parts of your sensor.
- Insert the appropriate end of the provided Micro USB cable into your sensor’s USB port. Your NERO-MULTI is now powered on.
For a battery powered installation:
- Remove the rear part of your sensor as shown in the previous step 1 above.
- Insert CR123A batteries oriented according to the picture below.
NOTE: If you just have only one CR123A battery, please insert the battery into the primary battery holder.
Power supply: USB DC 5V or battery power (2×CR123A batteries, 3V, 1500mAh).
Operating temperature: 0 C to 40 C
Measured temperature range: -10 C to 50 C Accuracy: ±1C
Measured humidity range: 20%RH to 90%RH Accuracy: ±3%RH (at 25 C)
Lighting: 0 LUX to 30000 LUX
Max motion sensitivity: 5 meters
Water proofing: IP20
Operating distance: 20 meters no obstruction