The All Lights quick command feature uses device categories to decide whether they should be a member of the function or not. This allows non-Nero lights to be included in the command, such as Philips Hue bulbs.

Add a device to the quick command

All devices that are in category 2 or 3 and sub-category 1, 2, or 3 within them will be included in the command to turn all devices on or off. To add a device to one of these categories perform the following steps.

1. Go to the device information page by clicking the green arrow next to the device.
2. Select the Advanced option and then the Params tab.
3. Change the value of category_num" and "subcategory_num" to the appropriate setting based on the table below.

Remove a device from the quick command

To ensure a device does not get included in the command list set it to an appropriate category and sub-category that are not included in the quick commands shortcut.

1. Go to the device information page by clicking the green arrow next to the device.
2. Select the Advanced option and then the Params tab.
3. Change the value of category_num" and "subcategory_num" to the appropriate setting based on the table below.