It is important that when installing Environexus devices that you install them according to the included wiring diagram. This means that all devices should have a fuse installed inline with them to protect the device against damage in the case of an overload or fault situation.
Some devices vary with their fuse location. Ensure that you have located the fuse in accordance with the wiring diagrams.
Environexus recommends the use of ceramic fuses over glass fuses.
The below fuses are for your reference only. Environexus can not provide electrical advice, a licensed A-Grade electrician must select the appropriate fuse, fuse holder, and installation method in accordance with the locally applied standard.
|Device||Fuse size||Fuse reference|
|10A / 250V||
|1A / 250V||
Nero Dual Relay
|4A / 250V||
Where can I purchase fuses?
Your preferred electrical wholesaler should have fuse and fuse holder options that meet the specifications in the wiring diagrams for the specific devices you are installing. If your preferred supplier doesn't have fuses available, FuseCo has been recommended to Environexus by several installers. FuseCo also provides power conditioning hardware which can be helpful in parts of Australia with poor energy grids.